XLC 2500 Crown

XLC 2500

Two-channel, 500W @ 4Ω Power Amplifier

Available in two models, the XLC2500 and XLC2800 incorporate Crown’s proprietary DriveCore™ Technology, which significantly reduces the amplifiers’ size, while yielding much more energy efficient operation – without sacrificing performance. Compact, powerful and cost-effective, the XLC Series provides ease of installation, outstanding sound quality and the unwavering reliability inherent in every Crown product. These amplifiers are powerful, affordable options for both the cinema and install markets.

XLC 2800 Crown

XLC 2800

Two-channel, 800W @ 4Ω Power Amplifier

Available in two models, the XLC2500 and XLC2800 incorporate Crown’s proprietary DriveCore™ Technology, which significantly reduces the amplifiers’ size, while yielding much more energy efficient operation – without sacrificing performance. Compact, powerful and cost-effective, the XLC Series provides ease of installation, outstanding sound quality and the unwavering reliability inherent in every Crown product. These amplifiers are powerful, affordable options for both the cinema and install markets.

CXM 2000 Crown

CXM 2000

Cinema Monitor and Crossover System

Crown’s CXM2000 is a Cinema Monitor and Crossover System. With the CXM2000, audiences can enjoy wonderful sound from JBL cinema speakers. When used with Crown amplifiers, it allows for either processor input signal or amplifier output signal monitoring, which immediately indicates when a signal path has a problem. The fault signal can also be passed to TMS (Theater Management System), so the cinema manager can check the audio system working status without leaving his office. All necessary controls for daily operation of the CXM2000 are easily accessible on the front panel. This device will significantly improve the speaker audio performance and offer peace of mind in the operation of a theater system. Crown CXM2000, Crown cinema amplifiers and JBL cinema speakers constitute the Harman total solution for cinema owners who share the same goal of introducing stable and high-quality movie-watching experience with HARMAN.

DSi 6000 Crown

DSi 6000

Two-channel, 2100W @ 4Ω Power Amplifier

Engineered from the ground up for unmatched quality and performance, the Crown® DSi Series of power amplifiers offers four models of 500W, 800W, 1,200W, and 2,100W per channel at 4 ohms. Onboard digital signal processing includes crossovers, EQ filters, delay and output limiting. Rear panel HD-15 connector provides easy input/output connectivity between DSi amplifiers and the new DSi-8M System Monitor. At the touch of a button, Crown’s DSi cinema amplifiers deliver perfectly matched performance with each award-winning JBL ScreenArray® system, making this the ultimate cinema solution.

4645C JBL

4645C

4645C Single 460 mm (18 in.) Subwoofer System

The JBL Model 4645C is a high quality subwoofer system, featuring an advanced technology 460 mm (18 in), low frequency transducer mounted in a direct radiator, bass-reflex enclosure for smooth response to the lowest audible frequencies. The 4645C is ideal for low-frequency augmentation of either analog or digital soundtracks in motion picture theaters and for general sound reinforcement applications.

4641 JBL

4641

Single 460 mm (18 in.) Subwoofer System

The JBL Model 4641 is a high quality subwoofer system, featuring an advanced technology 460 mm (18 in), low frequency transducer mounted in a direct radiator, bass-reflex enclosure for smooth response to the lowest audible frequencies. The 4641 is ideal for low-frequency augmentation of either analog or digital soundtracks in motion picture theaters and for general sound reinforcement applications.

4642A JBL

4642A

Dual 460 mm (18 in.) Subwoofer System

The JBL Model 4642A is a high quality subwoofer system, featuring an advanced technology 460 mm (18 in), low frequency transducers mounted in a direct radiator, bass-reflex enclosure for smooth response to the lowest audible frequencies. The 4642A is ideal for low-frequency augmentation of either analog or digital soundtracks in motion picture theaters and for general sound reinforcement applications.

9350 JBL

9350

Configurable Pattern, Unique 3-Way 15″ Design

The 9350 packs a sonic punch, and delivers extraordinary coverage through its advanced engineering, including three patent-pending technologies. Each loudspeaker generates a sculpted side or rear pattern, adjusted with the flick of a switch. With a passive crossover network, waveguide technologies, and line array techniques, coverage can be adjusted to fit a theatre’s unique environment. The 9350 further enhances coverage by configurable vertical and horizontal coverage angles based on whether the surround is located on the rear or side wall location.

The result? Premium performance and left/right balance overall, an accomplishment unheard of in cinema. It means the sonic sweet spot just got a whole lot bigger, and that sculpted, impactful sound now comes from all sides. Ultimately, the audience becomes immersed in an audio experience like none other. Rely on the 9350, the ideal complement to front screen loudspeakers, for superior sonic character and dynamics – everywhere.

8320 JBL

8320

Compact Cinema Surround Speaker for Digital Applications

The 8320 Cinema Surround Speaker offers high power handling, high sensitivity, and extended bass response in a very compact enclosure. The twoway 8320’s reliability and performance features position it as the ideal low cost, compact surround for the extended dynamic range required by digital sound formats.

9310 JBL

9310

High Power Cinema Surround Loudspeaker 2-Way Passive
1″ HF, 10″ Woofer (2″ VC)

The 9310 Cinema Surround offers high 350 Watt power handling capability, high sensitivity, and extended base response in a groundbreaking design. The two-way 9310 features new transducer technologies, waveguide and horn designs developed specifically to produce studio quality performance with pattern control tailored to modern theatre geometries.

Combining JBL’s Image Control Technology and new asymmetric wave-shaping techniques, the 9310 surround features a Wave Shaping Vane, integral to the design, to distribute acoustic energy in proper proportion to the room. This technique provides a wave-front that is sculpted to the room geometry and provides very precise coverage capability.

The 9310 features a high power, long throw 250mm (10 inch) low frequency driver for smooth extended base response. The high frequency section utilizes a 25mm (1 inch) composite diaphragm compression driver with high output capability.

The unique, high tech, molded, black textured enclosure with open high frequency horn and black grill will enhance any décor.

Built to traditional JBL quality standards, the 9310 will stand up to long term use, even under adverse conditions while delivering excellent performance.

9300 JBL

9300

Cinema Surround Loudspeaker 2-Way Passive
1″ HF, 10″ Woofer (2″ VC)

The 9300 Cinema Surround offers high 250 Watt power handling capability, high sensitivity, and extended base response in a groundbreaking design. The two-way 9300 features new transducer technologies, waveguide and horn designs developed specifically to produce studio quality performance with pattern control tailored to modern theatre geometries.

Combining JBL’s Image Control Technology and new asymmetric wave-shaping techniques, the 9300 surround features a Wave Shaping Vane, integral to the design, to distribute acoustic energy in proper proportion to the room. This technique provides a wave-front that is sculpted to the room geometry and provides very precise coverage capability.

The 9300 features a high power, long throw 250mm (10 inch) low frequency driver for smooth extended base response. The high frequency section utilizes a 25mm (1 inch) composite diaphragm compression driver with high output capability.

The unique, high tech, molded, black textured enclosure with open high frequency horn and black grill will enhance any décor.

4732 JBL

4732

Three-Way Biamplified or Triamplified (T) ScreenArray
Loudspeaker System

The 4732 ScreenArray features true three-way system design enhanced for critical film sound reproduction in medium to large cinemas environments

3732 JBL

3732

Three-Way Biamplified or Triamplified (T) ScreenArray
Loudspeaker System

The 3732 ScreenArray features true three-way system design enhanced for critical film sound reproduction in small to medium cinemas environments

3722/3722N JBL

3722/3722N

Two-Way ScreenArray™ Cinema Loudspeaker System

The 3722N provides smooth and accurate reproduction of cinema soundtracks in a compact and very cost
effective system

4722/4722N JBL

4722/4722N

Two-Way ScreenArray™ Cinema Loudspeaker System

The 4722 provides smooth and accurate reproduction of cinema soundtracks in a compact and very cost
effective system

DSi 4000 Crown

DSi 4000

Two-channel, 1200W @ 4Ω Power Amplifier

Engineered from the ground up for unmatched quality and performance, the Crown DSi Series of power amplifiers offers four models of 500W, 800W, 1,200W, and 2,100W per channel at 4 ohms. Onboard digital signal processing includes crossovers, EQ filters, delay and output limiting. Rear panel HD-15 connector provides easy input/output connectivity between DSi amplifiers and the new DSi-8M System Monitor. At the touch of a button, Crown’s DSi cinema amplifiers deliver perfectly matched performance with each award-winning JBL ScreenArray® system, making this the ultimate cinema solution.

DSi 2000 Crown

DSi 2000

Two-channel, 800W @ 4Ω Power Amplifier

Engineered from the ground up for unmatched quality and performance, the Crown® DSi Series of power amplifiers offers four models of 500W, 800W, 1,200W, and 2,100W per channel at 4 ohms. Onboard digital signal processing includes crossovers, EQ filters, delay and output limiting. Rear panel HD-15 connector provides easy input/output connectivity between DSi amplifiers and the new DSi-8M System Monitor. At the touch of a button, Crown’s DSi cinema amplifiers deliver perfectly matched performance with each award-winning JBL ScreenArray® system, making this the ultimate cinema solution.

DSi 1000 Crown

DSi 1000

Two-channel, 475W @ 4Ω Power Amplifier

Engineered from the ground up for unmatched quality and performance, the Crown DSi Series of power amplifiers offers four models of 500W, 800W, 1,200W, and 2,100W per channel at 4 ohms. Onboard digital signal processing includes crossovers, EQ filters, delay and output limiting. Rear panel HD-15 connector provides easy input/output connectivity between DSi amplifiers and the new DSi-8M System Monitor. At the touch of a button, Crown’s DSi cinema amplifiers deliver perfectly matched performance with each award-winning JBL ScreenArray® system, making this the ultimate cinema solution.

Dolby Integrated Media Server IMS3000

Dolby Integrated Media Server IMS3000

A robust platform for today, the right investment for tomorrow.

Dolby Atmos Cinema Processor CP850

Dolby Digital Cinema Processor CP750

CHOOSE THE RIGHT PROCESSOR FOR YOUR CINEMA

Whether you’re ready to equip your cinema for an immersive Dolby Atmos® audio experience now or prefer a flexible processor that you can upgrade in the future to deliver a full Dolby Atmos experience, we have a CP850 processor that’s ideal for your needs.

Dolby Digital Cinema Processor CP750

Dolby Digital Cinema Processor CP750

The Dolby Digital Cinema Processor CP750 provides easy-to-operate audio control in digital cinema environments. It supports innovative Dolby Surround 7.1 premium surround sound and integrates seamlessly with existing technologies.

Christie CP4450-RGB

Christie CP4450-RGB

Brightness Up to 55,000 lumens with HB lens, 42,000 lumens with UHC lens at DCI white (<25°C ambient)*

Contrast ratio

Up to 6000:1 full on/off with UHC lens, 2000:1 with standard HB lens

Digital micromirror device 

1.38″ Enhanced 4K 3-chip DMD DLP Cinema

Resolution

4K (4096 x 2160)

Illumination performance (hrs)

>50,000*

Christie CP4330-RGB

Christie CP4330-RGB

Brightness Up to 28,000 lumens (<25 C ambient)*

Contrast ratio

Up to 6000:1*** full field on/off

Digital micromirror device 

1.38″ Enhanced 4K 3-chip DMD DLP Cinema®

DMD DLP Cinema®

4096 x 2160 (4K)

Resolution

4K (4096 x 2160)

Christie CP4315-RGB

Christie CP4315-RGB

Brightness Up to 15,000 lumens at DCI white (<25°C ambient)*

Contrast ratio

Up to 6000:1 full field on/off

Digital micromirror device 

1.38″ Enhanced 4K 3-chip DMD DLP Cinema®

DMD DLP Cinema®

4096 x 2160 (4K)

Resolution

4K (4096 x 2160)

NC3540LS NEC Laser Projector

NC3540LS

Laser Projector

Type DLP                       RGB Laser
Supported Screen Size up to 28 meters (91 feet)
Resolution 4096 x 2160          4K
Light Source RGB Laser

 

Datasheet

NC1201L NEC Laser Projector

NC1201L

Laser Projector

Type DLP              Laser Phosphor
Supported Screen Size up to 12 meters (39 feet)
Resolution 2048 x 1080
Light Source Laser Phosphor

 

NC1000C NEC Digital Cinema Projector

NC1000C

Type DLP
Supported Screen Size up to 10.6 meters (34 feet)
Resolution 2048 x 1080
Light Source NSH Lamp, max. 0.8 kw

 

Datasheet